question

Mike Dorsett avatar image
Mike Dorsett asked

VE Direct on /dev/ttyS0 ?

Is it possible to configure Venus to accept a VE-Direct connection on the Raspberry Pi built in UART? This is normally configured as /dev/ttyS0 under Raspian, what needs to be configured in Venus to get this to work?

Venus OSRaspberry PiVE.Direct
3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Rob Duthie avatar image Rob Duthie commented ·
Hi

Yes it does work on the raspi3B+ with the older ver 2.66 software.


0 Likes 0 ·
Mike Dorsett avatar image Mike Dorsett Rob Duthie commented ·
Hi Rob,

I did not try this with the 2.66, only with the 2.72 software....Thanks.


0 Likes 0 ·
Show more comments
0 Answers