This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Have MPPT 75/10 Smart controller. If I change from the Trend screen to Status or History, the data and the 2 selected parameters I am tracking disappear. Nothing is displayed until I re-select the 2 parameters, BV, BAmp. This just happened after updating firmware.
Thanks
Hi,
What is the version of your VictronConnect? This can be found in the VictronConnect settings menu.
Kind regards,
Thiemo van Engelen
Where in Connect settings do I find the Connect "version"? Is that the same as the firmware version number I just updated?
Hi,
The VictronConnect settings can be accessed using the "hamburger" menu on the top left (left of the text "Device list") when you are on the main device list page of VictronConnect.
Kind regards,
Thiemo van Engelen
It is 5.44, done on 6/20/21. This week ONE of the two Trend selected parameters (Bat A) remained as I switched back and forth to Status and History.
Hi @Ted Burke
A few questions that might help us:
Which trend parameters did you select?
Which was on the left and which one on the right?
What type of device are you using VictronConnect on (tablet/phone/PC/Android/iOS/etc..)?
Kind regards,
Thiemo van Engelen
