This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi all,
the victron app tells me always that the MPPT is already conencted to anoterh device. I was connected before with my phone und my phone made a restart.
I read already that i could cut the power and the PV from the MPPT. But this is no option for me because my dealer installed the MPPT in a way that i have to uninstall some furniture in my motorhome. Does anyone has another idea?
Flightmode, uninstalled and reinstalled, all is done, helps not.
Try connecting to the MPPT with a different device (i.e. your laptop or another phone) and see if that works.
Hi Thomas, eventually you could proceed at night, no power from the PV and just disconnect your battery. Wait a few seconds, and then reconnect the battery, it should fix the issue.
Michel
Thanks a lot, i try this, hope i can read the cables for the battery at the MPPT. I have only a few centimeters for the screwdriver. No idea why there is no power off or reset button on the device for such errors
There most definitely should be a power off for your system.
An accessible isolator to physically switch off the solar panels is an essential safety feature that must be installed by the installer in all systems.
in general you are right. I have this for nearly all devices but not for the MPPT.
On the other hand, my opinion is that every electrical device should have a power off button. As a television, i would not power off the complete house in case i want to power off the television only ;-)
