question

jan-brix-castillo avatar image
jan-brix-castillo asked

BYD LVL and old model BlueSolar VE.Can compatibility

Good day, all! We need help on this.

We have an existing system that uses Victron BlueSolar Charger MPPT 150/85 VE.Can, Victron MultiPlus 48/5000/70-50, Color Control GX and lead-acid AGM battery. We are now going to replace the battery with BYD Premium LVL 15.4.

Is this possible with the existing system? What should also be the configuration of the charge controller and the MultiPlus?

Thank you!

MPPT ControllersMultiPlus Quattro Inverter ChargerBYD
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Sorry @Jan Brix Castillo,

This configuration with the old style Blue Solar VE.Can MPPTs (the long ones with the screen) is not supported.

That range of MPPTs was previously compatible with earlier BYD models that used allow-to-charge contacts, but the new BYD LVL models require DVCC functionality, and this is only available on the new MPPT models.

Apologies for that, but the upgrade might need to include the new model MPPT as well.

Note: the Color Control GX (CCGX) also only has a single CAN-bus interface, and this is required for the BYD LVL, so unless using a Cerbo GX, you will need to use the VE.Direct MPPTs.


4 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jan-brix-castillo avatar image jan-brix-castillo commented ·

Thank you, @Guy Stewart (Victron Community Manager). Much appreciated! Can you recommend what MPPT we can use to replace the old one?

0 Likes 0 ·
Guy Stewart (Victron Community Manager) avatar image Guy Stewart (Victron Community Manager) ♦♦ jan-brix-castillo commented ·

Hi @Jan Brix Castillo,

Interesting timing on this one @Harry Chavez - in his recent post but opposite situation that you are in.

He needs your older style VE.Can MPPT for his older model BYD batteries (using allow-to-charge).

Would you both be interested in a trade?

Jan, you will need Harrys replacement Smart Solar 150/85 (connected via the VE.Direct port) which is not easily compatible with his current system.

If you are both willing to swap MPPTs, then this would be the EASIEST solution for you both.

0 Likes 0 ·
jan-brix-castillo avatar image jan-brix-castillo Guy Stewart (Victron Community Manager) ♦♦ commented ·

Hi @Guy Stewart (Victron Community Manager) thank you for the quick response! I don't know if you have read the reply of @Harry Chavez but let me fill you in that we cannot actually trade MPPTs since his was concluded to be defective and also, the system I am working on uses two BlueSolar MPPTs and his replacement is only one SmartSolar.

0 Likes 0 ·
Show more comments