This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Good day, all! We need help on this.
We have an existing system that uses Victron BlueSolar Charger MPPT 150/85 VE.Can, Victron MultiPlus 48/5000/70-50, Color Control GX and lead-acid AGM battery. We are now going to replace the battery with BYD Premium LVL 15.4.
Is this possible with the existing system? What should also be the configuration of the charge controller and the MultiPlus?
Thank you!
Sorry @Jan Brix Castillo,
This configuration with the old style Blue Solar VE.Can MPPTs (the long ones with the screen) is not supported.
That range of MPPTs was previously compatible with earlier BYD models that used allow-to-charge contacts, but the new BYD LVL models require DVCC functionality, and this is only available on the new MPPT models.
Apologies for that, but the upgrade might need to include the new model MPPT as well.
Note: the Color Control GX (CCGX) also only has a single CAN-bus interface, and this is required for the BYD LVL, so unless using a Cerbo GX, you will need to use the VE.Direct MPPTs.
Thank you, @Guy Stewart (Victron Community Manager). Much appreciated! Can you recommend what MPPT we can use to replace the old one?
Interesting timing on this one @Harry Chavez - in his recent post but opposite situation that you are in.
He needs your older style VE.Can MPPT for his older model BYD batteries (using allow-to-charge).
Would you both be interested in a trade?
Jan, you will need Harrys replacement Smart Solar 150/85 (connected via the VE.Direct port) which is not easily compatible with his current system.
If you are both willing to swap MPPTs, then this would be the EASIEST solution for you both.
