This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
dear all
Some VRM data is not updated after lost of internet connection, update interval is set to 1 minute.
Portal Id “38954”
it happened on a RPI version 2.60~30 connection lost for more then 12 hours
Tested it again on my RPI 2.54 Same result(30 min test)
Not update are
BMV SOC
BMV Voltage &Current
MPPT pv-volt & Current
MPPT PV yield
Inverter Volt & Current
system Battery Power
system Battery current
updated are
system AC consumption
system Battery Voltage
inverter state
Hi @Ray_mont, dank!
I think I see whats wrong here, your devices have shifted:
The enumeration on VRM relates to USB enumeration: plugging / replugging can change it. A bit of a pi issue, since it doesn't have fixed VE.Direct ports.
Normally, once plugged in, and then rebooted once, everything is stable.
To get those graphs, either change the USB / VE.Direct wiring to get back on the old instances; or change the widgets configuration in the Advanced page on VRM.
success!
just recheck if I was able to recreate the same issue but I could not.
Rpi with firmware 2.60~31 did send the data correctly to the VRM portal
thanks for all your support
ray
see also:
https://community.victronenergy.com/questions/55683/vrm-portal-vebus-show-partially-no-data-to-display.html
@mvader (Victron Energy) is it correct that this issue is pending
i just saw your other comment that there was a “visualization issue” and no data was lost
but my missing data did not show up(yet)
groetjes Ray
you and your company are doing a perfect job.
Thanks @mvader (Victron Energy)
this Shifting in the device list happened when tried to recreate this issue on Monday morning
But the data from Sunday 5 o’clock til Monday 7 o’clock is still gone
today after 3 o'clock I will try to recreate the same problem
with the new beta firmware 2.60 ~31
