TR-Charge cable

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

andrew2200 asked Mar 16, '20

I am looking into the Victron MultiPlus Inverter Charger 12V/3000VA/120A and want to know what the TR-Charge cable is for?

Thank you in advance

wiring

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

JohnC answered · Mar 16, 2020 at 01:52 PM

Ahh, ok. Not sure, but I suspect a wire for the 'trickle charge' capability for a separate starter batt on the 12V models.

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

andrew2200 commented · Mar 16, 2020 at 03:02 PM

Thanks John,

Looks like that is the trickle charge cable.

0 ·

Answer 1 · 2020-03-16T13:02:34Z

JohnC answered · Mar 16, 2020 at 01:02 PM

It's to allow the Multi's charger to temp-compensate it's charge V's. And in more complex systems to pass it on to other kit as well.

Usually comes in the Multi box, at least for the bigger ones.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2020-03-16T13:08:17Z

andrew2200 answered · Mar 16, 2020 at 01:08 PM

Hi John,

The temperature lead is included, but the TR-Charge is not see The quick installation Guide

https://www.victronenergy.com/upload/documents/Quick-Install-Guide-MultiPlus-12V-24V-48V-3000VA-50A-EN_outlines.pdf

Item G under not included, any idea?

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.