My Victron 100/50 controller is mounted at the rear of my RV in an enclosed metal compartment. Hence the BT Signal won't make it much further than right above the compartment in the back of the RV. I want to get the signal at the front of the RV. Currently the only way that appears to be possible is to add a BT Dongle. But I need a longer cable than what they come with standard. (5feet, 1.5m) I need about a 5 meter or longer cable. My question is, does anyone make a VE.Direct extension cable? I am thinking it needs to have a female connector on the other side to allow the BT Dongle to plug in to it. I have seen male to male VE.Direct cables, and my assumption is they may be cross over cabling to swap the send and receive channels. If no one makes an extension, does anyone know what that connector is called so I can try to solder one up? Thanks, Bill
