The response from the Victron BOFFINS on similar topics is to check and then re-check, and then re-check that the installer is not an idiot. Then they (the BOFFINS) give up.
Victron wise men, can you find the problem and fix it?
This question was
closed
by
nickdb for the following reason:
asked
Cannot set Zero export despite trying all options
@energy@greenpro.co.za Unless you provide some detailed information on the installation, AC outputs and inputs in use, energy meters or similar, ESS configuration etc. and how you are trying to limit export e.g. grid setpoint etc. who knows?
ET340 installed at grid input (1) and selected as the meter in settings.
No 2nd input.
Tried the following 2 options in ESS settings.
What else is relevant to know?
"What else is relevant to know?"
Everything system related. All components and settings. A wiring diagram would also help.
