Zero feeding not working ET340

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

247energysolutions asked Jul 14, '24

Zero feeding not working ET340, 3 x 5kVa Multiplus II. 3 Phase setup. DC Coupled MPPT.

Battery Discharges to grid. Please assist.

export

export-to-grid-should-be-nil.jpg (81.4 KiB)

export-to-grid-should-be-nil-2.jpg (70.1 KiB)

export-to-grid-should-be-nil-3.jpg (52.1 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2024-07-14T16:11:01Z

Duivert NL answered · Jul 14 at 04:11 PM

What is your grid setpoint? Also et340 is not so fast, system is trying to balance loads

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2024-07-15T17:13:07Z

247energysolutions answered · Jul 15 at 05:13 PM

Grid setpoint at 200W

Setting is on Individual Phase.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 3 · 2024-07-16T04:08:32Z

Duivert NL answered · Jul 16 at 04:08 AM

Did you try, and is it allowed in your country to set it on multiphase?

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.