Victron Multiplus 12/3000/120/50
Scenario:-
Boat away from the dock. Engine off, need to run the inverter but it will not switch from "OFF" unless we start the boat engine. After a few moments above idle rpm, the Inverter will switch on then everything is fine. If I turn the inverter off and later try to run the inverter again, same thing - have to start the engine. Once the inverter is on, then I can shut down the engine and everything works as exepected.
I'm guessing it's a programming issue ( not using any clever Code Red features at all )
It's as though some setting is recognizing that the battery voltage is too low to run the inverter but the batteries are typically around 99-100% charged ( 300Ah LiFePo4 )
Any ideas?
( had to choose Multiplus-II as Topic as Multiplus was not an option)