question

jos-sbr avatar image
jos-sbr asked

Extra display on Easysolar II GX ?

The situation is a EasySolar II GX 24/3000/70-50 in parallel with a Multiplus II 24/3000/70-50

Connected to VRM portal.


Is it possible to add an extra display, color control, etc. here?

Multiplus-II
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Kevin Windrem avatar image
Kevin Windrem answered ·

You can add a Cerbo, CCGX, etc to the system by disconnecting the one internal to the EasySolar. You will then not have a local display however.

CCGX is not recommended for new installations. It will not ever support gui-v2 for example.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

You could use a (old) phone or tablet to connect to the remote console locally.

6 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

marekp avatar image marekp commented ·

Wanted to do that but iPAD2 does not work with VRM.

0 Likes 0 ·
Dean Perry avatar image Dean Perry marekp commented ·
you don't need VRM access, just have the iPad on the same local network as the EasySolar-II or even just connect directly to the access point in the EasySolar-II.

I think "enable remote console on LAN" is always enabled on an EasySolar-II - I don't have one here to check.

0 Likes 0 ·
Show more comments
jos-sbr avatar image
jos-sbr answered ·

I'm going to try with an iPad

Thank you.!!

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.