Extra display on Easysolar II GX ?

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

jos-sbr asked Jul 2, '24

The situation is a EasySolar II GX 24/3000/70-50 in parallel with a Multiplus II 24/3000/70-50

Connected to VRM portal.

Is it possible to add an extra display, color control, etc. here?

Multiplus-II

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

119 People are following this question.

Answer 1 · 2024-07-03T02:07:30Z

Kevin Windrem answered · Jul 03 at 02:07 AM

You can add a Cerbo, CCGX, etc to the system by disconnecting the one internal to the EasySolar. You will then not have a local display however.

CCGX is not recommended for new installations. It will not ever support gui-v2 for example.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2024-07-03T03:29:37Z

Matthias Lange - DE answered · Jul 03 at 03:29 AM

You could use a (old) phone or tablet to connect to the remote console locally.

6

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

marekp commented · Jul 03 at 05:39 AM

Wanted to do that but iPAD2 does not work with VRM.

0 ·

Show more comments

Answer 3 · 2024-07-03T09:24:40Z

jos-sbr answered · Jul 03 at 09:24 AM

I'm going to try with an iPad

Thank you.!!

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.