question

russtreacy avatar image
russtreacy asked

Two parallel Multiplus-II split phase

I have 2x Multiplus-II programmed for Split Phase. Is it possible to take advantage of the internal current sense by routing the mains service through AC-IN terminals? L1 on unit 1 and L2 on unit 2. If so, how is it recommended to split the neutral conductor?

Multiplus-II
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Justin Cook avatar image Justin Cook ♦♦ commented ·

Read the parallel and split-phase manual here, and pay close attention to all other documents linked therein, including wiring, programming, and etc: https://www.victronenergy.com/live/ve.bus:manual_parallel_and_three_phase_systems

0 Likes 0 ·
russtreacy avatar image russtreacy Justin Cook ♦♦ commented ·
Converting this to comment. The question is not answered on those docs.
0 Likes 0 ·
0 Answers