This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have 2x Multiplus-II programmed for Split Phase. Is it possible to take advantage of the internal current sense by routing the mains service through AC-IN terminals? L1 on unit 1 and L2 on unit 2. If so, how is it recommended to split the neutral conductor?
Read the parallel and split-phase manual here, and pay close attention to all other documents linked therein, including wiring, programming, and etc: https://www.victronenergy.com/live/ve.bus:manual_parallel_and_three_phase_systems
