I bought a multiplus-ii 12|3000|12-5 2x120v invert / charger for my camper van. I'm trying to connect the 4/0AWG cable to the M8 Ground connector. I'm using a 4/0AWG lug with a 5/16 inch hole. The lug is 1.02 inches (~26mm) wide and will not fit through the insert (~25mm).
I cannot find a 4/0 AWG Lug that would fit through the inlet.
The supplier suggested cutting the lug off the end, feeding the cable through the hole and then adding the ground lug on, and connecting. I can certainly do that, but that doesn't seem to be the right answer.
I don't think Victron intend grounding cables to be crimped after being fed through the inlet hole.
I have two questions:
1) Does any one know of a 4/0 AWG Lug with a M8 / 5/16" hole?
2) Does this multiplus-ii version support 4/0 AWG cables?