i am looking to create a Victron-raspberry pi...
First question
Does a raspberry pi communicate or display to the VRM portal
Does anyone has a list of hardware require for the Raspberry pi
Tks
This question was
closed
by
fenix for the following reason: The question is answered, right answer was accepted
asked
Does a raspberry pi communicate or display to the VRM portal
Yes, RaspberryPi communicates with VRM the same as any Venus device.
You have the remote console too which is accessible on LAN IP address or via VRM.
Required hardware depends upon what equipment you want to connect to the RaspberryPi.
Almost everything must be via USB, so VE.Direct devices (BMV, most MPPT's, some inverters) will each need a VE.Direct to USB dongle: https://www.victronenergy.com/accessories/ve-direct-to-usb-interface
VE.Bus devices (MultiPlus, Quattro) will need MK3 to USB dongle: https://www.victronenergy.com/accessories/interface-mk3-usb
Run your RaspberryPi from a good power supply, the official RaspberryPi PSU is a good one.
