question

craig-d86 avatar image
craig-d86 asked

Raspberry Pi- adding to online VRM Portal

Hi Everyone,


Just setup my Pi with a Multiplus 2

Trying to add the device to the online portal- asking for VRM Portal ID.

Where would that be ? I have tried the WiFI MAC and it does not work .



VRMRaspberry Pi
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi @Craig_D86, I added the answer as item 10 in the rpi getting started manual:


https://github.com/victronenergy/venus/wiki/raspberrypi-install-venus-image


enjoy your system! Matthijs

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

craig-d86 avatar image craig-d86 commented ·

Great !

Thanks for your help Mvader, Was trying to add the WiFi MAC and not the LAN.

0 Likes 0 ·
craig-d86 avatar image
craig-d86 answered ·

Hello,

Thanks for your response.

is this what you are referring to ?

"Open a browser, and navigate to the ip address, for example http://192.168.52.3. If all went well, you will see the Remote Console page loading, and will be able to browse the menus. "


If so, this is not what i am looking for.


below is a screenshot of where i am trying to add the R Pi to victrons online portal.





1579773266560.png (26.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Oops. Sorry, I meant item 10.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.