Hi I was just wondering if I can connect a touch screen for the Rasberry Pie to a genuine Victron Cerbo GX and will it work ok or can it be done with some set up?
asked
Can I use a 7" Rasberry Pie touch screen with the cerbo GX?
I was able to get the screen linked below to work with no issues. I did have to run the calibration and dimming setup. I was hoping RpiDipsplaySetup would work so I wouldn't have to worry about updates but apparently it's not compatible with a Cerbo S-GX. Otherwise it's a good option. Anyone know of a way to keep the settings from getting wiped after an update?
https://www.amazon.com/gp/product/B08KXXKPW9/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
The "official Raspberry PI 7" touchscreen" can not be connected to Cerbo.
SOME HDMI displays have been successfully connected to Cerbo.
Hi Kevin, It's not the Official one I have ordered, I wonder if anything has to be set in the Cerbo or the display for it to work?
If the display plugs into the DSI port on the PI it will not work with Cerbo.
As I said, SOME HDMI touchscreens work. SOME DO NOT. There are no settings in Cerbo.
Are you the same Mr Windrem who did the Gui mods? If so may I thank you for all your wonderful work.
You are welcome, it's people like you who make the Internet and these forums a wonderful place, also what you have done with the Venus software put Victron to shame and might shake them up a bit into making their software a little more user-friendly shall we say.
Obviously, I don't want to get into a discussion about your mods, as this is not the place for it, but I would be stupid having accidentally found you not to ask you a question that I have spent some time trying to solve with no luck, so I will risk it :-). In Package manager when trying to install VeCanSetup, it says it has to be done from the command line, How can I do this in a real Cerbo? Is there some instructions somewhere please?
I apologise if I have overstepped the mark, I am 72 and new to this stuff, Would I use putty? Bob
GuiMods started off as an enhancement to the flow overview screen, presenting more information in a single screen. However, it has evolved to the point of being "a screen full of numbers". It's only really attractive to someone with extreme technical orientation. A much larger display device is really required for this much information.
I have been thinking a lot about how best to display information that non-technical users can interpret and the gauges are (in my opinion) are the right approach. No numbers at all on the overview screens !!!!!!
Victron's gui-v2 is a complete rethink of the user interface and is a huge step in the right direction. Focus is on providing clean, uncluttered displays that non-technical users can interpret. While it is not ready for real use it is worth a look to see the direction Victron is headed.
Thank you Kevin. Yes I think you are right, I also think that by merit of what the person is doing (Installing an off grid Solar installation, in a house, van, boat or whatever) they must have some technical knowledge, I was an Electronics engineer all my working life, before I retired. Anyway, I love what you have done and I will have a look at that link tomorrow and see what I can figure out, when I get to the prompt is the command to install it fairly simple? I have a reasonable knowledge of PC's windows though, some knowledge of Linux, used to do a fair bit of mod stuff in Satellite receivers etc. Bob
Kevin, so I have logged in with putty and got no such file?
"login as: root
Last login: Sat Feb 10 22:29:47 2024 from ***********
root@einstein:~# /data/VeCanSetup/setup
--- starting setup script v3.9
creating package options directory /data/setupOptions/VeCanSetup
cat: can't open '/data/VeCanSetup/FileSets/fileList*': No such file or directory"
I can see the files are in/data/VeCanSetup, but there is no FileSets folder that the script asks for?
I found a bug in SetupHelper. v6.4 was just released to fix that.
Hi Kevin, I have auto update on and auto install, will it update itself or do I need to do it?
The SetupHelper update will download and install automatically. You will then need to run the VeCanSetup setup script from the command line manually.
That's what I thought, but I have been sat her over an hour and it hasn't yet!
I have experienced delays in my GX device seeing the new GitHub version and suspect it's due to caching in the internet world. This usually resolves in a half hour or so however and not the hour you are experiencing.
Make PackageManager shows v6.4 is available as a GitHub version for SetupHelper. If -- is shown, check your internet connection to the GX device.
You can also force a GitHub version refresh by turning off automatic downloads and turning it back on again.
Hmm still not installing Kevin.
"root@einstein:~# /data/VeCanSetup/setup
--- starting setup script v3.9
VeCanSetup adds CANbus ports to the Venus OS system
Cerbo GX includes 2 CANbus ports
an unlimited number of USB ports may be configured
Available actions:
Install and activate (i)
Uninstall (u) and restores all files to stock
Quit (q) without further action
Display setup log (s) outputs the last 100 lines of the log
Choose an action from the list above: i
no CANbus definitions found ?
There are more steps after install. You need to add port definitions. Check out the ReadMe for details.
Victron has instructions on how to access the command line:
https://www.victronenergy.com/live/ccgx:root_access
well, you seem to be the guy to ask,
if you know and could kindly share? what screen does work natively with the cerbo gx?
Would this one work?
UCTRONICS for Raspberry Pi Screen 7 Inch IPS Touchscreen with Prop Stand, 1024×600
It connects through hdmi and usb and has the same resolution as the touch 7"
im just getting into all this and keep hearing about guimods, so thank you for your contribution!
Edit: guess i shouldve kept reading as someone linked to one that will work. which is a 7" 800x480
I found the same exact screen but in a 1024x600 version, should work right?
https://www.amazon.com/gp/product/B01GDMDFZA/ref=ox_sc_act_title_1?smid=A3UAI31N6IJM2&psc=1
Anyway, back to the display. The one I purchased was the Electrow 7" HDMI , when I connect it to the Cerbo it looked promising, I got a Blue Victron splash screen saying it was starting and then it displayed the Cerbo display. problem is though the size is only about a third the size of the screen and the touch doesn't work correctly because of that.
I don't know if there is anything I can do now? there are no settings to change the picture size anywhere, on the displays menu I can only change the aspect ratio, any ideas anyone please?
So for the moment I have given up with the Cerbo and this screen and I have set up a Rasberry Pie 4 to be a Cerbo the screen looks good but of course there is a problem.
When I touch anything I get something else, looking closely I can see a very very tiny mouse pointer and it is always tracking about an inch from my finger tip and I cannot move it below a third of the screen. Is this a problem with the screen or is it a problem with the Venus software for the Pie? Is there anything I can do to correct it please?
You need to calibrate the touch part of the display. My RpiDisplaySetup package will help with that. Please look over the ReadMe and go through the setup process as there are prompts at each step. You need command line access for this!
Hi Kevin, Superb mate, I have installed it on the Rasberry Pie 4 and the touch screen and display work perfectly now. As I said in the previous message, am I right in saying I must not run this on a real Cerbo? If so are you going to do one for the Cerbo?
Also there was a Victron Firmware update 3.2 and now Gui mods won't work saying there isn't a version for 3.2. Thank you Kevin .Bob
RpiDisplaySetup is for Raspberry PI only and makes no sense for Cerbo.
A few people have tried HDMI displays on Cerbo with random success. It seems to depend on the display. Efforts to make a display that does not work function have not been successful, so there really is nothing I can do to automate a generic HDMI setup script for Cerbo. Sorry.
Your options are to use the GX touch with Cerbo or to use other displays with a Raspberry PI running Venus OS.
I use a 11" hdmi screen (shared with computer onboard) and a mouse very successfully on my cerbo. It doesn't like gui 2.0 as the cursor doesn't show but that is in beta so hoping they fix that before full release.
Hi Henry, is that screen connected directly to the Cerbo or to your PC or laptop though. Bob
I have purchased another screen and this one works perfectly with the Cerbo-GX straight out of the box, it's this one.
https://www.amazon.co.uk/dp/B0BHJ26B32?psc=1&ref=ppx_yo2ov_dt_b_product_details
I'm sure there may be others, would be nice if there was a sort of central repository where everyone could list screens they have bought that work with no modifications. Anyway this one works perfectly
Hi Wilbur, there are no usb micro's on the Cerbo, only on the 7 and 5 inch monitors, I have a micro usb from the touch micro socket on the monitor to one of the two USB A sockets on the Cerbo. Don't get caught out by the fact that the third USB A socket on the Cerbo, the one nearest the centre, is for power only. Bob
awesome thanks!
i found this same one on the US amazon for anyone looking
7" 800x480
but im a stickler for resolution and i found the same exact screen for only $5 more but in 1240x600 which is the same native resolution as the victron touch 7"
7" 1240x600
i wonder this would work the same?
