This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Seeing how its impossible to source a Cerbo GX at this time, and not wanting to hold up my launch, im wondering if anyone has successfully linked the Rec-BMS to a Raspberry Pi? The Rec controls the Victron gear through the CAN interface. Im hoping someone can point me to a solution that connect the Rec to Pi. Ill be installing 4P4S LifePo4 (280ah each) into a marine environment. Also have a multi-plus 12/3k/120 w/ (2) 100/50 MPPT, a 220BP, an Argo Fet, and BVM-712.
Hi, I’d personally try to get a canbus hat for your pi. or a usbconnected can interface.
There is documentation here, but note thats its “community maintained”: I dont know how up to date it is.
https://github.com/victronenergy/venus/wiki/RaspberryPi-CAN-Interfaces
could be that by the time you have this up and running, your Cerbo arrives :-). But I can say anything date-wise there, sorry.
all the best, Matthijs
