Hi. I see this question before but no one responded.
I need the HEX protocol of this charger for a proyect i have.
Thanks.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi. I see this question before but no one responded.
I need the HEX protocol of this charger for a proyect i have.
Thanks.
Try setting up a program to read the hex registers using the default protocol and comparing the results with either the asci stream or victron connect. I tried this for the smart shunt, with fair results for reading the registers.
I tried to read the values following the HEX protocol for MPTT and it works!
Also i tried some registers from the BMV HEX protocol like the main voltage monitor (0xED8D) and works also!
So i guess the register are common between products and they implement depending on the product
Thanks for the idea @Mike Dorsett!
The VE.Direct hex protocols are published on the Victron download area, you have to submit your e-mail address to get the download link.
Additional resources still need to be added for this topic
29 People are following this question.