Hi. I see this question before but no one responded.
I need the HEX protocol of this charger for a proyect i have.
Thanks.
asked
VE.Direct HEX protocol on Phoenix Smart IP43
Try setting up a program to read the hex registers using the default protocol and comparing the results with either the asci stream or victron connect. I tried this for the smart shunt, with fair results for reading the registers.
I tried to read the values following the HEX protocol for MPTT and it works!
Also i tried some registers from the BMV HEX protocol like the main voltage monitor (0xED8D) and works also!
So i guess the register are common between products and they implement depending on the product
Thanks for the idea @Mike Dorsett!
The VE.Direct hex protocols are published on the Victron download area, you have to submit your e-mail address to get the download link.
I tried looking there for the smart shunt protocol, and it was not there at that time.
I think, there are 2 files, one is for the BMV and the other has all other Ve.Direct devices covered, just read through the files. Smartshunt and BMV are the same.
