I am using the mppt sizing calculator and have some questions about the results. Here are my inputs using a custom module:
Wp: 305
1 series 3 parallel
Voc: 45.6
Isc: 9.05
Vmpp: 37.4
Impp: 8.16
System voltage 12.
With these inputs in recommends the BlueSolar MPPT 150/60 Tr but not the SmartSolar Mppt 150/60 Tr. As near as I can tell they have the same specs. Is there a limiting factor?
Also, given the input, what would the outputted amps be from the charge controller given the best case scenario? I am not sure how to calculate the conversion.