question

Peter Buijs - NL avatar image
Peter Buijs - NL asked

MK3 Case Lost

Hi,

Unfortunately I lost the top part of the case from my MK3 interface.

The interface is still fully functional but like this it is vulnerable.

It is somewhere in the bilge of a large ship under the motor, not able to find it there.

So if someone has a defective MK3 lying around I would be helped.

Any other cheap solution is welcome.

I suppose Victron is not able to deliver an empty case...

1626777108122.jpeg

1626777144343.jpeg

1626777171447.jpeg

MK3
1626777108122.jpeg (900.3 KiB)
1626777144343.jpeg (396.8 KiB)
1626777171447.jpeg (436.6 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
juan3211 avatar image
juan3211 answered ·

Hi, may be any 3d case printed?

I need your help, I haven't any victron equipment but i am thinking about it, could you please attach here more photos of the mk3 "chips"?

I want to know if i could get UART interface from pcb board. Probable before usb there is any uart-usb converter IC.

I want to read the IC's marks to know if any of them is a uart-usb converter.

There are 3 chips near usb connection: one with 8 pins, other with 16 pin (I see) and another one with lots of pins, could you attach here their photos? Thanks (or even, write here their marks/names)

Please, help me, thanks

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

wkirby avatar image wkirby ♦♦ commented ·

There is a FTDI USB-Serial converter. There is a digital isolator also.

Your biggest problem is the big chip is a PIC microcontroller. The MK3 firmware for this PIC is not available.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic