question

iand avatar image
iand asked

Multiplus-II 48/10000 instead of Quattro 48/10000 -- lower idle power

After concerns about high zero-power consumption with the Quattro 48/10000 (up to 100W reported compared to 60W in datasheet) I see there is a new Multiplus-II 48/10000 announced which claims 38W. Let's hope the data sheet is accurate this time, then I can stop having to consider a second low-power inverter for when high-power loads aren't connected... ;-)

Multiplus-II
4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Phil Gavin avatar image Phil Gavin commented ·

But with the new Multi-plus II 10000 model, the documentation indicates you lose the ability to parallel units on the same phase. A red-line issue for me.

0 Likes 0 ·
Paul B avatar image Paul B Phil Gavin commented ·

Phil as far as I am aware you can still parallel Multiplus II units of the same model. you cant however parallel a Multiplus II with a Multiplus unit

basically the Quattro has 2 inputs the Multiplus II has one. plus other differences as per spec sheets


0 Likes 0 ·
Phil Gavin avatar image Phil Gavin Paul B commented ·

This is from the documentation:

1622259699861.png

0 Likes 0 ·
1622259699861.png (240.6 KiB)
Show more comments
0 Answers