I have a problem with the smart dongle. When I connect via bluethoot to the inverter, the smart dongle is in secondary mode because it detects a colour control. But I do not have a colour control installed in the VE.Bus network.
Can someone help me?
asked
Multiplus II 24/3000/70-32 Smart Dongle problem
The dongle always starts in secondary mode and will switch to primary mode after around 30sec if there is no GX device connected.
https://www.victronenergy.com/live/vebus_smart_dongle_manual#modes_of_operation
Right, I read the same thing, but it doesn't change mode even after a long time.
Is there anything else connected to the VE.Bus or only the dongle?
Try to change the RJ45 cable and also try to use the other RJ45 port
Already tried, is there no possibility of resetting the Multiplus II? I think the problem is not with the dongle, but with the Multiplus.
I guess you already tried to switch the Multi OFF and ON.
To get access to the settings of the Multi you will need a MK3 Interface.
Is you Multi maybe one with an internal GX module?
Yes.
I also think that the only solution is a Color Control or an MK3.
No, it doesn't have a built-in GX.
Danke viel mal für deinem zeit, ich habe jetzt mit dem MK3 Usb was machen können.
Nun, ist mit der smart dongle immer das gleiches.
