question

Alessio Guscetti avatar image
Alessio Guscetti asked

Multiplus II 24/3000/70-32 Smart Dongle problem

I have a problem with the smart dongle. When I connect via bluethoot to the inverter, the smart dongle is in secondary mode because it detects a colour control. But I do not have a colour control installed in the VE.Bus network.


Can someone help me?

Multiplus-II
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

The dongle always starts in secondary mode and will switch to primary mode after around 30sec if there is no GX device connected.

https://www.victronenergy.com/live/vebus_smart_dongle_manual#modes_of_operation

8 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alessio Guscetti avatar image Alessio Guscetti commented ·

Right, I read the same thing, but it doesn't change mode even after a long time.

0 Likes 0 ·
Show more comments