question

advaith-g-n avatar image
advaith-g-n asked

Is it possible to connect the Venus GX with Texas Instrument board via Ethernet cable ?

Greetings,

May i know whether it is possible to get data displayed in the ' Remote Console' of Venus GX through Modbus TCP coding to Programing board of Texas instruments (launchxl2-570lc43)


Regards,

Advaith


Venus GX - VGXModbus TCPremote console
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
markus avatar image
markus answered ·

Hi.
may I ask you again, what exactly you want to do?

Which data and for what purpose?

When you take your time to supply that information, maybe you will get a good solution here.

BR

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

advaith-g-n avatar image
advaith-g-n answered ·

Hello Markus,

Thank you for your reply.

I actually want to have make a communication between Venus GX & Programming board (launchxl2-570lc43 )via LAN cable.

From that communication, I want to receive the data which is displayed in the Remote Console of Venus GX.(such as Battery voltage, current, ac loads etc...).

Thus the programmable board gets information about the devices connected to Venus GX and will be able to perform like a VCU(Vehicle Control Unit).

Before that i need to know whther the VGX will provide all information via LAN cable.


Regards

Advaith


10 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

markus avatar image markus ♦♦ commented ·

Hi,

yes! You can use (e.g.) ModbusTCP protocol to pull data from the VGX to your programming board.

See here:

GX Modbus-TCP Manual [Victron Energy]

and here:

Download file Modbus-TCP register list - Victron Energy

Have fun! ...and success!

0 Likes 0 ·
advaith-g-n avatar image advaith-g-n markus ♦♦ commented ·

Hi Markus

Thank you for your reply.

0 Likes 0 ·
advaith-g-n avatar image advaith-g-n markus ♦♦ commented ·

Hi Markus

Can you please provide more information about Modbus TCP protocol

0 Likes 0 ·
markus avatar image markus ♦♦ advaith-g-n commented ·

https://en.m.wikipedia.org/wiki/Modbus

0 Likes 0 ·
advaith-g-n avatar image advaith-g-n markus ♦♦ commented ·

Thank you for the reply

Can you plaese shre more information about Modbus TCP coding that would be suitable for implementing communication with VGX


Regards

Advaith

0 Likes 0 ·
markus avatar image markus ♦♦ advaith-g-n commented ·

This question is too general to give a good answer.

I don't know your programming board.

BR

0 Likes 0 ·
Show more comments