Hi,
I’m currently testing the new MPPT RS 450. I got twice the error code "#121 Tester Fail". I am not able to find the list of error codes for this equipment. Thanks in advance to point me this list.
Cheers
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi Yaute,
The list of error codes can be found here: https://www.victronenergy.com/live/mppt-error-codes
For this specific error it contains the following text:
If the unit does not work and error 121 pops up as the active error the unit is faulty, contact your dealer for a replacement.
If the error is only present in the history data and the unit operates normally this error can be ignored safely. Explanation: when the units powers up for the very first time in the factory, it does not have calibration data and an error 121 is logged. Obviously this should have been cleared, but in the beginning units left the factory with this message still in the history data.
Kind regards,
Thiemo van Engelen
Hi Thiemo,
Thanks to have updated the mppt-error-codes list few days ago. It will be great to add the #10 "Battery low" as the #121 is always associated with #10 "low battery". FYI, I monitored the battry voltage on the RS 450 and I did not seen any glitch. The RS 450 did produce without "Yesterday" and "2 days ago" but it logs other stuff. Shall I ask VE an RMA?
27 People are following this question.