question

apple047 avatar image
apple047 asked

Grid meter over TCP/IP,

Hello,

This question was asked few times in the past but maybe someone came up with a solution,

My goal is to transfer the data from the grid meter to my Cerbo, a new cable to run is inconvenient, so I've tried to configure 2 modbus gateways one as a master and one slave to carry the signal over Ethernet but something is wrong and can't figure out what exactly.

I can see the Cerbo (192.168.2.239) is sending requests and getting replies but they don't engage in data transfers too much, however with the Carlo Gavazzi software (192.168.2.148 my laptop) everything communicates fine, is there a specific settings to be set to the meter? the meter is currently set to address 1, parity none, baud rate 9600, stop bit 1. other important details the meter communicated fine and probably still works with my raspberry pi via USB directly.

Any input is appreciated, best case would be to make the Cerbo read the meter via TCP/IP

Thanks in advance George

capture.png

capture-1.png

capture-3.png

cerbo gxEnergy MeterModbus TCP
capture.png (77.9 KiB)
capture-1.png (77.2 KiB)
capture-3.png (57.1 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

hey, I'm sorry I can't help you with above.


But just to make sure: you are aware that we also have & support an ethernet meter that talks ethernet natively? https://www.victronenergy.com/live/energy-meters:start.



3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

apple047 avatar image apple047 commented ·

I wasn't aware of the Ethernet version of the meter... Now i know :)

I ended up with running a new cable, everything works as expected now

Thanks

0 Likes 0 ·
Show more comments
hennie-mouton avatar image
hennie-mouton answered ·

George

Did you get this sorted? I have a similar thing coming into existence shortly.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.