question

Eric Peetoom avatar image
Eric Peetoom asked

Multiplus quattro remains in passthrough after installation assistant

Hoi,

The problem is as soon as I install an assistant on my Multiplus quattro via VRM, he immediately switches to passthrough modes,

As soon as I remove the assistant it works normally again, but I can't use ESS

When I log in directly to the laptop connected via the victron mk3 with VEConfig or with victron connect, he sees the quarttro

immediately but when I log in via Venus os he does not see the quattro.


This system has been running without problems for over a year.


Have already updated the firmware of the multiplus and the Venus os (raspberry).


Multiplus Quarttro 3000/24 firmware 4.85

Venus os V 2.64 (raspberry)


Who can help me.

Eric. ( Curacao)

MultiPlus Quattro Inverter ChargerESSAssistants
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi, you mean the ESS Assistant, right?


then please check the ESS manual.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Eric Peetoom avatar image Eric Peetoom commented ·

Even een update, het probleem zat in de mk3-USB interface ik had nog het oude model met een losse usb kabel, er lijken veel problemen mee te zijn, ik heb hem nu voor het nieuwe model vervangen met een vaste usb kabel en zo werkt weer perfect.

0 Likes 0 ·
Show more comments