question

siemcio avatar image
siemcio asked

Can i operate Multiplus from touch50 and cerno

Hi, can i operate Multiplus with Touch50 snd cerbogx ( inverter/off/charger and Amperage control ) or i need additionally DMC ? Or maybe is another way ? Thank you for help.

cerbo gxgx device
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

Hi @Siemcio,

yes you can - unless you have a VE.Bus BMS in your system.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

siemcio avatar image
siemcio answered ·

Thank you for answer , unfortunately I have VE.Bus BMS with Victron LifePo4 battery , so there is any other configuration with victron battery ? Can I use different BMS ?

4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·

What MultiPlus do you have?

0 Likes 0 ·
Show more comments
siemcio avatar image
siemcio answered ·

I have MultiPlus 12/3000/120-50 120V

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Cerbo GX product page

GX family product range

Cerbo GX & GX Touch datasheet

Cerbo GX Manual

Venus root access document

Additional resources still need to be added for this topic