This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I'm looking for something similar to the Victron Energy ASS050300010 wall-mounted enclosure for Multi Control GX-panels but for the Touch 50. So far I haven't found anything.
Does Victron sell something like that for the Touch 50?
If Victron doesn't currently sell something like this, are there any plans in the works to make one available?
When I installed my system I also wondered how it would be mounted. I came up with a pretty nice substitute.. Its a standard electric box lid. Fits perfectly and doesn't look bad at all..
Thanks for the post. I sure hope Victron is seeing the need here and manufactures and nice enclosure like the Victron Energy ASS050300010 wall-mounted enclosure for Multi Control GX-panels but for the Touch 50!
Currently there is nothing like that available, but maybe in the future.
What's the rough timeline for that future option?
Someone needs to start making these using a 3-D printer.
I don't know, I'm not Victron.
It was just a guess that there will be one in the future.
I looked at that a while back and unfortunately, that won't work. There needs to be something behind the screen to accommodate the thick wire that comes out.
Ok, here is how I solved the problem.
The whole thing is held in place by 4 round velcro pads.
Hopefully, this mich is of help to others with the same requirements.
There is a mount available for wall mounting without having to cut a hole..... It's from Victron itself
https://www.victronenergy.com/accessories/gx-touch-50-wall-mount
PN: BPP900465050 - 15€ ex VAT
Thanks! Finally!
I'm sure there are many who will want this. But at this point, I might as well keep my custom enclosure which has its own sort of charm. I'll have to think about it.
Thanks again for coming back to post this. I will let AM Solar on Oregon know about it as well.
Jon
