Hello
I'm new here and I need Yours help.
I am asking for professional technical support.
At the outset, sorry for my English, I'm learning.
The subject of the problem is mine MultiPlus Compact model 24/1600/40-16.
The processor was damaged during the short-circuit of the installation. Its part number is SEC014009000, and the software was 1916125, which is the version of the old processor.
The short circuit was removed and the 5V power supply and all other signals were restored.
The question is whether the old processor can be replaced with a new processor and upload new software 2616xxx?
If it is possible to swap the chip, what version of the PIC. If not, what is the old version of the system and where the hex input comes from.
I count on any support because I feel sorry for my device. Even for a private message about this model only.
Thank you for any help and tips.