question

Cansin Sari avatar image
Cansin Sari asked

Polarity protection for mobile multiplus

Hello everyone,

the manual states(Multiplus 48/3000), that the Phase from the Grid should be connected to the Phase-In from the Inverter. Due to the mobile usage of the Inverter, the Inverter shall be connected to the Grid with a Schuko plug https://upload.wikimedia.org/wikipedia/commons/thumb/2/23/Schuko_plug_and_socket_annotated.png/240px-Schuko_plug_and_socket_annotated.png. However the right plugging of the schuko plug is not always ensured, because you can plug the schuko plug in two ways (Not turned Phase to Phase, and turned Phase to Neutral). Does somebody know a device, that stops the current from follwing when the device is not connected properly?

Multiplus-IIoffgridshorepower
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

I don't know of any device that can do that but we installed the Multi in hundred or thausend mobile applications without any problems.

What you could do (or should) is using two pole MCB at the outputs of the Multi.

5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Cansin Sari avatar image Cansin Sari commented ·

Hey Matthias,

kann man denn die Phase auf den Neutraleingang vom Wechselrichter legen? Wenn ja, kann man dann immernoch die Powershare Funktion benutzen, heißt Batterie und Netz gleichzeitig?

Danke dir im Voraus.

0 Likes 0 ·
Show more comments
seb71 avatar image
seb71 answered ·

Mark the plug to know which is L on your inverter cable.

Check the power outlet to see which is L before inserting the plug.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.