Hey Guys,
I have a EasySolar II GX with an additional MPPT charger in a dc coupled system. The addition MPPT charger is connected to the EasySolar II via Can.bus with terminators either side of the link between them.
I have notice that when I log into the EasySolar via its IP, I see the internal MPPT 250/70 listed but not the additional MPPT 250/100 unit. If I log into the vrm portal and check devices I see the EasySolar GX, MultiPlus II, Smart Shunt and the MPPT 250/70 only.
What would cause a unit not to appear??
Nathan