question

Woody avatar image
Woody asked

Wireless remote screen using Raspberry Pi - Possible?

I've searched here and Googled elsewhere and haven't found what I'm looking for so maybe one of the smarter than me people here can tell me if this is possible. I have a 40' RV with my Cerbo GX installed way in the back. I want to have a display for it up front roughly 35' away. Is there a GOOD way to do this? A tablet running the remote console is not good. I was thinking a Raspbery Pi running Venus connected to the network via Wifi or Ethernet somehow slaved to the Cerbo or has someone come up with a way to install the GX Touch 50 remotely?


cerbo gxVenus OSgx deviceremote console
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi have you tried running the MFD App on the tablet (which can if you like it also be ran on a rpi no doubt).

See MFD App section in the Cerbo manual.
https://www.victronenergy.com/media/pg/Cerbo_GX/en/marine-mfd-integration-by-app.html


Extending a HDMI signal over that distance (for the GX Touch itself) might be possible; or not; but I wouldnt know.

“Slaving” a second gx device is not possible I’m afraid.

5 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Woody avatar image Woody commented ·

So far, the MFD is the best option I've found other than using the CSS edited Remote Console to remove the arrow keys. The biggest problem with the MFD is I haven't found a way for it to display tank levels. Am I missing something?

0 Likes 0 ·
mvader (Victron Energy) avatar image mvader (Victron Energy) ♦♦ Woody commented ·

right, that is missing the tanks. Which were left out on purpose, since the original idea (showing this on a marine MDF) doesn't need tanks: the MFD itself can show tanks.


however, thanks for the reminder - for many use cases it would be nice to have the tanks; I'll make sure its done.

0 Likes 0 ·
Show more comments
Peter Buijs - NL avatar image
Peter Buijs - NL answered ·

Connect a TP-Link TL-WA901ND with Ethernet to the Cerbo.

Configure the TP-Link as an access point

Connect to the AP and start the Remote Console or VictronConnect


1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Woody avatar image Woody commented ·

What will that do other than add complexity? Sounds like that would help with range but I don’t see how it’ll give me a more functional remote.

0 Likes 0 ·