I have a client with a 150/85 Ve.Can MPPT and 1260w of panels but he wants to add 840w more. Both of which charge the same battery bank. The current 150/85 is connected to a Color Control GX via a Ve.Direct cable. If I add another Ve.Can MPPT and use a RJ45 to connect them in parallel will the Ve.Direct to the GX display the information for both MPPTs?
I know that a RJ45 would of done this to the GX per the manual, but I can't find anywhere if the Ve.Direct will work the same.
Or should I just use the Smart Networking to put the MPPTs in parallel? And if I do that will the Ve.Direct send the info to the GX for both controllers?
The two MPPTs will be on different arrays and have thier own wires. It's just a pain to run another Ve.Direct or RJ45 to the GX, plus it will save the customer on labor cost.
