Please can someone tell me how to set a smart blue ip22 12/30 settings for lifepo4 manufacturer recommends 14.6v bulk and absorb charge of 14.4v ?
In the custom settings, it does not allow just bulk and absorb charge.
Thanks in advance Regards Rob
asked
smart blue ip22 12/30 settings for lifepo4
Hi @rob1evans,
this can be achieved with VictronConnect.
- 1. Go into settings
- 2. Enable Advanced settings
- 3. Open Advanced battery settings
- 4. EnableExpert mode
- 5. Change settings according to your battery manufacturer
Then you can save settings into a preset. But that's not mandatory.
I understand I only need bulk charge 14.6v and absorption 14.4 but can't do that in settings both have both the same voltage, also I can't stop storage voltage. Regards Rob
Not sure I understand. What do you mean with Bulk voltage and absorption voltage?
The dilemma is that every manufacturer using his own definition of Bulk, Absorption, Float and Storage. Usually bulk and absorption have the same meaning.
Can you please post the specs for your battery.
