question

rob1evans avatar image
rob1evans asked

smart blue ip22 12/30 settings for lifepo4

Please can someone tell me how to set a smart blue ip22 12/30 settings for lifepo4 manufacturer recommends 14.6v bulk and absorb charge of 14.4v ?

In the custom settings, it does not allow just bulk and absorb charge.

Thanks in advance Regards Rob



Lithium Battery
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

Hi @rob1evans,

this can be achieved with VictronConnect.

  • 1. Go into settings
  • 2. Enable Advanced settings
  • 3. Open Advanced battery settings
  • 4. EnableExpert mode
  • 5. Change settings according to your battery manufacturer

Then you can save settings into a preset. But that's not mandatory.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

rob1evans avatar image rob1evans commented ·

I understand I only need bulk charge 14.6v and absorption 14.4 but can't do that in settings both have both the same voltage, also I can't stop storage voltage. Regards Rob

screenshot-20210122-213452.jpg

0 Likes 0 ·
screenshot-20210122-213452.jpg (155.4 KiB)
Show more comments

Related Resources

Additional resources still need to be added for this topic