question

willowfarm avatar image
willowfarm asked

Smart solar 250/60 charger off?!

Bought new charge controller, connected panels. But the charger is not turning on.

I have checked all cables, fuses and rebooted.

i attach images


9bb6cb07-92dd-46ea-a0f9-dc1b177b020c.png

31a50835-7dcd-408b-8286-a7848a309b74.png

error
31a50835-7dcd-408b-8286-a7848a309b74.png (302.3 KiB)
9bb6cb07-92dd-46ea-a0f9-dc1b177b020c.png (333.5 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
klim8skeptic avatar image
klim8skeptic answered ·

What about the remote port of your mppt?

Is the link in place?

Any remote charge enable devices hooked up to the remote port disconnected?

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

willowfarm avatar image willowfarm commented ·

I’m not sure what this means... could you explain? The mppt is Bluetooth?

0 Likes 0 ·
seb71 avatar image seb71 willowfarm commented ·

A small black 2-pin connector (on the underside of the MPPT case) with a jumper wire between the two pins.

0 Likes 0 ·
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

You have 0V PV voltage. Check the polarity of the PV wiring.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image klim8skeptic ♦ commented ·

Ur right, it's 11:32am..

0 Likes 0 ·
willowfarm avatar image
willowfarm answered ·

To clarify- the charge controller has power, but is not charging at all, not even getting to bulk state. It appears there’s no input from panels at all.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image klim8skeptic ♦ commented ·

Your Mppt can be powered by the batteries... no input needed from solar....to display mppt data....

Matthias is correct,, pv array is open circuit (disconnected) from mppt.


0 Likes 0 ·
Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·

Your solar panels are not connected correctly (a loose connection somewhere or reverse polarity).
You have to check this.

0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic