Hi Everyone,
I need a little help with Modbus Control. I have a Cerbo gx and quattro unit with pylontech batteries. It is all working perfectly however i am looking to interface to my home automation system.
Does anyone have experience with Modbus TCP registers on here?
I am looking to enable and disable charge plus also have the option to maximise the output of the inverter so that I am able to to discharge to grid where possible. Any help with some configurations of the Modbus.
So basically any help with modbus config is great. I have got the communication working perfectly and able to read values from the cerbo gx, i.e. SOC of batteries. via modbus.
Appreciate any help.
Thanks
Mike