question

inigodu avatar image
inigodu asked

Resolution reading energy commands

Hi! My question is regarding the commands that read energy flows (in kWh), in particular commands 2606, 2603, 2622, 2628, 302 and 301. When I read these commands through Modbus, they return a value with one decimal number, for example, 15.3. I would like to know if it is possible that these commands would return values with a higher resolution, that is more decimal numbers, or if there are other alternative commands that do this.

Thanks!

Multiplus-IIMultiPlus Quattro Inverter ChargerEnergy MeterModbus TCPkwh
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kai avatar image kai ♦ commented ·

don't know the answers re: visibility through modbus, but whatever the number that's sitting in the victron unit will be limited by the resolution of the actual current sensor and integration errors.

0 Likes 0 ·
0 Answers