question

the-doon avatar image
the-doon asked

Firmware update v1.53 and networked MPPTs

I have 3 SmartSolar 100/30s networked with a Smart Battery Sense and after updating the firmware this morning the Network total power now shows the same figure as what’s shown in the meter above. It seems as if the screen from all the devices shows the same info. Does this mean I can’t see individual data from each seperate device?

MPPT SmartSolarfirmware update
bc436bcb-cf12-437f-aba7-42f94c681901.jpeg (674.9 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

the-doon avatar image the-doon commented ·

Or is it that the Network total power isn’t actually showing the total?

0 Likes 0 ·
1 Answer
the-doon avatar image
the-doon answered ·

Problem solved. Disconnected the 3 devices from the network and then reconnected. All working correctly now.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.