question

stef81 avatar image
stef81 asked

Any risk of upgrading a CCGX never updated for 5+ years ?

Hi, I bought a houseboat with a Victron setup installed in 2015.

Among others, the CCGX has never been updated nor upgraded. It is not connected to internet. It still runs a firmware V1.14 of 2014. Is there any risk involved in upgrading the CCGX to the newest firmware ?

My plan is

  1. Upgrade the CCGX to V2 following the description here : https://www.victronenergy.com/live/ccgx:firmware_upgrade_to_v2
  2. Connect the CCGX to Inernet (which is currently not the case) and let it auto-update to the V2.xx current version

The link above tells how to upgrade from V1.74 to V2; my CCGX is V1.14. Any risks involved ?

Thanks !

CCGX Color Controlfirmware update
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @SteF81,

There is always a risk in touching something that is already working.

The strong advice from Victron when it comes to firmware updating:

  • During commissioning / first install;
  • When trouble shooting;
  • To add a new feature that is required by the installation.

We can rule out commissioning, so that leaves us with:

Are you having troubles that might be solved with a firmware update?

Does the system require a new feature that is offered in a firmware update?

If the answer to both of those is no, then you should not take the risk.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

stef81 avatar image stef81 commented ·

Hi @Guy Stewart (Victron Community Manager),

Thanks for the detailed answer. I would like to benefit from features which appeared after 2014 like MQTT integration (I wish to automatize some load shedding by processing real-time data of the off-grid system and controlling smart plugs) and the remote console on LAN.

About risks, my question was more about getting knowledge of any known issues in upgrading from V1.14 to V2 and if I would need instead to first update from V1.14 to V1.74 and then in a second step upgrade from V1.74 to V2.

Best regards,

SteF

0 Likes 0 ·
Show more comments