question

valentin avatar image
valentin asked

CCGX SOC not shown

Hi,

Can somebody help me how to get the battery % showing on the display of the CCGX?

Thank you.

CCGX Color Control
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Ole Saether avatar image
Ole Saether answered ·
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) avatar image mvader (Victron Energy) ♦♦ commented ·

Ha; you beat me to it. ;o)

0 Likes 0 ·
valentin avatar image valentin commented ·

Thank you.

I tried a few things but seems nothing works.

Is it possible to explain step by step?

Some of the options I can't change in the settings.

Thank you.

0 Likes 0 ·
Ole Saether avatar image
Ole Saether answered ·

Do you have any of the three products that can calculate SOC connected to the CCGX?

9 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

valentin avatar image valentin commented ·

We have a MultiPlus 24/5000/120-100 connected to it.

Before was the % on the display, but not anymore.

I asked the company that installed, but they don't know.

We live in Spain.

0 Likes 0 ·
markus avatar image markus ♦♦ valentin commented ·

Hi @Valentin,

Settings --> System Setup --> Battery Monitor.

Have a look after this setting.

Or maybe the SOC calculation is disabled on the Multi itself?

Regards,

Markus

0 Likes 0 ·
valentin avatar image valentin markus ♦♦ commented ·

Hi Marcus,

The settings shows the multi.

How can I change the calculation, on the multi, so it is able?

Thank you

0 Likes 0 ·
Show more comments
blond2silver avatar image
blond2silver answered ·

Hello, would Victron or somebody please explain how to get the CCGX to display SOC when a BMV-712 is connected to the CCGX, and the SOC source? Meaning, the Multi's congig parameters ARE NOT enabled, and is hidden in CCGX - makes sense to be hidden when a dedicated and integral Victron device (BMV-712) is the source.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.