Hi,
Can somebody help me how to get the battery % showing on the display of the CCGX?
Thank you.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
Can somebody help me how to get the battery % showing on the display of the CCGX?
Thank you.
Do you have any of the three products that can calculate SOC connected to the CCGX?
We have a MultiPlus 24/5000/120-100 connected to it.
Before was the % on the display, but not anymore.
I asked the company that installed, but they don't know.
We live in Spain.
Hi @Valentin,
Settings --> System Setup --> Battery Monitor.
Have a look after this setting.
Or maybe the SOC calculation is disabled on the Multi itself?
Regards,
Markus
Hello, would Victron or somebody please explain how to get the CCGX to display SOC when a BMV-712 is connected to the CCGX, and the SOC source? Meaning, the Multi's congig parameters ARE NOT enabled, and is hidden in CCGX - makes sense to be hidden when a dedicated and integral Victron device (BMV-712) is the source.
10 People are following this question.