This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi there, my new inverter RS 48/6000 is running now with SmartShunt and Cerbo GX and a Fronius Primo 5.0. Unfortunately, I can't see the MPPT power on screen, and the MPPT doesn't appear in device list of the Cerbo. Firmware on GX is 2.57 (2.60 release candidate was running at first but the inverter doesn't appear with that version !!).
All the devices appear only on VictronConnect.
@stef We have the same issue with RS48/6000 appearing on the devices list but not on the pages view.
@guystewart Is there an update on this issue. Its outstanding since August now... Cheers
Same Problem here, is there already a solution?
I have the same problem. Could it be because a Fronius PV can be found on the network?
These previous posts were running on much older GX firmware. Have you updated to 2.92?
I really like the Inverter RS 6000/80 Solar and I strongly believe that has some advantage over the MultiPlus II for the off-grid system. On the other hand, Victron doesn’t adequately develop firmware, remote console and VRM to fix the multiple glitches present. VRM representation of current flow is still incorrect, mppt status is overlapped to inverter status and this is very annoying for a product that cost 4x the price of an equivalent Chinese product. Other glitches are present into the Advanced screen with values approximation and impossibility to set some trends… Hope for more attention by Victron…!
This post is from 2020.
The issue has been dealt with, just update to the newest firmware.
