question

Oleksandr avatar image
Oleksandr asked

Inverter status "Off" after upgrade to v 2.60 of Cerbo GX

Hello,

After upgrading Cerbo to v2.60 the Inverter RS 48/6000 turned into "Off" mode. It works, but seems to be unable to communicate with GX.

I tries all profiles for VE.can port in settings but in vain.

Would be grateful for any suggestions!

Regards,

Alex

cerbo gxoffgridinverter rs
whatsapp-image-2020-09-25-at-150800.jpeg (36.0 KiB)
whatsapp-image-2020-09-25-at-150757.jpeg (56.3 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Grant Willson avatar image
Grant Willson answered ·

Same here with a 12/250 - 230 inverter.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Daniël Boekel (Victron Energy Staff) avatar image Daniël Boekel (Victron Energy Staff) ♦♦ commented ·

Hi @Grant Willson

That is a completely different device, please use the search if there is an answer already and if not: open a topic for this.

0 Likes 0 ·
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @Oleksandr

CANbus connection is not yet supported unfortunately, for now you have to use a ve.direct connection to the RS inverters.

4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Oleksandr avatar image Oleksandr commented ·

Daniël, I almost had a heart attack thinking the inverter got faulty or something. Will order the ve.direct cable on Monday. Thanks a lot for letting me to know though!

Regards, Alex

0 Likes 0 ·
Oleksandr avatar image Oleksandr commented ·

Hi @Daniël Boekel (Victron Energy Staff),

Can you advise when it is expected for the RS inverter to support CANbus? Is it going to be announces somewhere?

Regards,

Alex

0 Likes 0 ·
Daniël Boekel (Victron Energy Staff) avatar image Daniël Boekel (Victron Energy Staff) ♦♦ Oleksandr commented ·

Hi @Oleksandr

It will be added in the 2.70 firmware, but that will start as a beta version so I advice to wait until it is stable enough.

0 Likes 0 ·
Oleksandr avatar image Oleksandr Daniël Boekel (Victron Energy Staff) ♦♦ commented ·

@Daniël Boekel (Victron Energy Staff), great, thank you! Will wait and update when a stable version is released.

Regards,

Alex

0 Likes 0 ·

Related Resources


Inverter RS Product page.

Inverter RS Online Manual.

Inverter RS Datasheet.

Additional resources still need to be added for this topic

Victron Offgrid page

Cerbo GX product page

GX family product range

Cerbo GX & GX Touch datasheet

Cerbo GX Manual

Venus root access document