This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I reached out to Garnet to understand which kit I would need to utilize the NMEA2k capabilities of the Cerbo GX. They told me to look at this version: 709-N2K NLP and they would sell it to me directly. I want the Cerbo GX/Touch 50 to be able to monitor the tank levels using this system. I want fresh, black, grey and propane monitored. How does this need to be setup so I can use the Cerbo GX/Touch 50 to display the information vs the display that Garnet has that comes with the kit?
Hi,
I think most of your answers can be found here:
https://github.com/kwindrem/SeeLevel-N2K-Victron-VenusOS
Unfortunately i have the non-N2K version so i can't confirm if it works.
Goodluck!
I have rewritten the TankRepeater. It is now here:
Curious, does the Cerbo run VenusOS? Venus and VenusOS are referred to in your repository, want to confirm before ordering the 709-N2K NLP from Garnet...
Yes, Cerbo, CCGX, VenusGX, OctoGX, CANvuGX, MaxiGX and Raspberry Pi all run "Venus OS". TankRepeater will work on any of them. EasySolar appears to use a CCGX. If so, TankRepeater should work.
I'm not sure about the MultiPlus-II GX. It has a bulit-in Venus device running on a Raspberry Nano PI. It does not have a VE.Can port so you'd need to add a USB CANbus interface. Processing power may also be an issue.
